Assembler
  1st Shaper
  2nd Shaper
  Infeed Conveyor Table
  Transler Roller Table
  Work Flows
  Home > Products > Automatic Finger Joint > 15/20 ACH Line > Assembler
  TWO section tables allow for feeding. Synchronized cutting to length and jointing for greatly saving cycle time.
  With top and bottom hydraulic feeding motor.
  Ensures simultaneous feeding.
     
 
Pre-press Station   Automatic Chain Feeding Conveyor
 
     
The station conducts pre-press operation before
hydraulic press.

The upper and lower press rollers are driven by a
hydraulic motor, providing high torque output and
simultaneous infeed.
 

The infeed table employs a chain feeding
conveyor belt driven by a 1/2 HP motor to achieve
effortless and fast wood infeed.

The specially-designed, quick adjustment
mechanism on the gear box allows for quick
shifting between two sets of press modulations
of different heights and widths.

   
 
 
MODEL YNF-15ACH YNF-20ACH
  Length of working table   4600 mm   6200 mm  
  Length of pre-press station & Chain feeding table   2915 mm   2915 mm  
  Available length of workpiece   2500 ~ 4600 mm   2500 ~ 6200 mm  
  Available thickness of workpiece   20 ~ 80 mm   20 ~ 80 mm  
  Available width of workpiece   30 ~ 150 mm   30 ~ 150 mm  
             
  CUT OFF SAW          
  Spindle diameter   25.4 mm (1") or 30 mm   25.4 mm (1") or 30 mm  
  Spindle speed   3600 rpm ~ 60 Hz ,
3000 rpm ~ 50 Hz
  3600 rpm ~ 60 Hz ,
3000 rpm ~ 50 Hz
 
  Saw diameter   304.8 mm (12")   305 mm  
             
  POWER REQUIRED          
  Conveyor belt   1 HP   1 HP  
  Chain feeding   1/2 HP   1/2 HP  
  Brush wheel   1/4 HP   1/4 HP  
  Cut off saw   3 HP   3 HP  
  Hydraulic pump   5 HP   5 HP  
  Feeding speed   63.8 m/min ~ 50Hz ,
70.2 m/min ~ 60Hz
  63.8 m/min ~ 50Hz ,
70.2 m/min ~ 60Hz
 
  Dia. of exhaust hood   4" x 1   4" x 1  
  Air consumption   6 kg / cm2   6 kg / cm2  
  Machine dimensions   8615 x 1270 x 1550 mm   9315 x 1270 x 1550 mm  
  N.W.   2500 kgs   2950 kgs  
  G.W.   2850 kgs   3400 kgs  
 
All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.
   
   
   
Home About Us Products Video Map Contact Us  
作榫機、角鑿機、三用接榫機、指榫機
 
No. 509, San Her Rd., Feng Yuan, Taiwan Tel : 886-4-25359185 Fax : 886-4-25357788 E-mail : jack.ynf@msa.hinet.net
Copyright (c) 2011 YUNG NIEN FA MACHINE INDUSTRY CO., LTD. All right reserved. Design by : YUNBO